DIY Solar Power for Homes

Diy Add comments

Solar power for homes has come a long way since the boxy design of the solar panels most of us are familiar with. Tremendous advancements have been made in solar cell construction that allow many building materials to be manufactured with the solar cells incorporated into their design effectively turning them into virtually undetectable solar panels.

Solar power for homes is supplied through one of two systems. The first is a stand alone solar power system that functions as your sole source of electricity. The other type is a supplemental solar power system which can supply all of your homes electricity depending on sunlight availability, and can utilize the power company grid when solar power is not available.

The basic components to generate solar power for homes are the same whether you opt for a standalone system or a supplemental system. First you have the photovoltaic panels, commonly known as PV or solar panels, these panels are lined with a semi conductor or solar cell that turns the rays of the sun into electricity. This electricity is then routed into a regulator/controller that keeps the current at the voltage/amperage level your system is designed for. The electricity is then routed either into your homes electrical system or into a battery array or storage system that will keep that solar power available when the sun goes down.

Installing a storage system has its pluses even if you’re connected to the grid. Your monthly utility bill will still be less than what you would pay for full service from the power company, but you’ll also have access to power in the event of any outages.

Augmenting or altogether replacing your power requirements with solar power for homes has never been simpler or more cost-effective than it is right now. There are new building materials include roofing material, car port roofing, awnings, and even the edges of your window-panes that contain solar cells. These types of solar panels are known as Building Integrated Photovoltaics. The application of the roofing materials not only serves as solar panels, they also provide for the same degree of protection as regular asphalt shingles.

One of the largest setbacks to adding or converting your home to solar power has always been the initial cost, there are however a growing number of ways to combat that cost. There are grants available on both the state and federal level to help offset a large portion of using solar power for homes. While the federal rebate may change from year to year, individual state rebates vary from state to state, with some states offering special low interest financing as an added green incentive to rebates.

Besides the fact that you’ll make your home greener using solar power for homes, you’ll also be seeing lots of “green” with all the savings on your utility bill. You may even be able to eliminate a utility bill altogether. A growing number of utility companies now have a metering program allowing you to sell to the power company any excess power produced by your solar power system. It certainly pays to go green!

About the Author:

Related Posts
Leave a Reply

WP Theme & Icons by N.Design Studio | RSS Feed